Luxman SQ-505X Integrētais stereo pastiprinātājs
| Zīmols | Luxman |
| Krāsa | Brūna, Sudraba |
| Stāvoklis | Antīks/ Vintage |
| Tehnikas veids | Pastiprinātāji, resīveri |
| Pievienots | Vakar, 20:0618 |
Pārdodu japānā ražotu vintāžas integrēto stereo pastiprinātāju Luxman SQ-505X. Skaists koka korpuss, lielisks skanējums. Visi nepieciešamie pieslēgumi, kā arī par atsevišķu samaksu pieejams arī pieskaņots atbilstoša stila un krāsu gammas Luxman radio tūneris.
Izskatīšu dažādus man izdevīgus maiņas variantus. Tai skaitā pret augstākas klases audio tehniku ar defektiem, kā arī 21. gadsimta skandām. Atrodas Valmieras centrā, reizi nedēļā iespējams saņemt Rīgā.
Par atsevišķu samaksu
varu piegādāt arī citviet Latvijā.
Specene:
Type Solid-state integrated amplifier
Main Amplifier Section
Continuous output 30W + 30W (8 Ω, both channels operating)
35W/35W (8 Ω, single-channel operation)
Total harmonic distortion factor 0.04% or Less (8 Ω, 30W)
Cross modulation distortion factor 0.04% or Less (8 Ω, 30W, 70 : 7 khz = 4 : 1)
Output bandwidth 5 Hz to 50 kHz -3dB (0.04%)
Frequency characteristic 10 Hz to 60 kHz (within -1dB)
Input sensitivity 430 mv (8 Ω, 30W)
Input impedance 50k Ω
Damping factor 30 (8 Ω)
60 (16 Ω)
Residual noise 1 mV or less
Preamplifier Section
Frequency characteristic 10 Hz to 50 kHz -3dB (Aux1)
Total harmonic distortion factor 0.05% or Less (1 kHz, 1 V, Aux1)
Input sensitivity Phono1, 2 : 2 mV
Aux1, 2, 3 : 80 mV
Input impedance Phono1 : 30k Ω, 50k Ω, 100k Ω
Phono2 : 50k Ω
Aux1, 2, 3 : 30k Ω
Signal-to-noise ratio Phono1, 2 : 63 dB or more
Aux1, 2, 3 : 80 dB or more
Maximum Allowable Input (1 kHz) Phono:300mV
Tone control LUX System NF Type with Bending Point Switching
Low Bend Point : Defeat, 150 Hz, 300 Hz, 600 Hz
High Frequency Curve Point : Defeat, 6 kHz, 3 kHz, 1.5 kHz
Residual noise 25 μ V or less
Crosstalk (1 kHz) Phono : -60dB or less
Aux : -65dB or less
Filter Low-cut : 70 Hz (-6dB/oct.)
High Cut : 6 kHz (-6dB/oct.)
Low booster 100Hz(6dB/oct)
Attachment Attenuator (-18dB)
Speaker switch (2 systems)
Premain isolation switch
Tape monitor (2 systems)
Recording output terminal (2 systems)
Semiconductor used Transistor : 31
Diode : 2 pcs
Varistor : 4 pcs
Power consumption 130W (8 Ω simultaneous load at maximum output)
External dimensions Width 450x Height 160x Depth 268 mm
Weight 10.5kg